Information as of 2026/11/06. This newsletter separates the text of the law, regulator explanations, and media or professional-body interpretation, and labels each item with its regulatory status and source. For actual application, rely on the latest announcements from each country's competent authority.
Key ASEAN Developments This Issue
- Vietnam|2027 regional minimum wage raised: Decree 399/2026/NĐ-CP, issued 2026/11/02, replaces 293/2025/NĐ-CP from 2027/01/01: VND 5.7 million a month in Region I to VND 4.04 million in Region IV, each up VND 310,000 to 390,000.
- Thailand|Solar panel imports must first link to a TISI e-permit: Thai Customs Department Announcement No. 132/2569 requires crystalline silicon photovoltaic modules or panels under tariff code 8541.43.00 to link to Thai Industrial Standards Institute (TISI, สมอ.) permit or certificate data from 2026/10/30; legal basis a ministerial regulation in the Royal Gazette of 10/29.
- Thailand|Excise tax on imported EVs raised to 35%: Per media reports, Thailand's cabinet approved on 2026/11/03 raising excise tax on fully imported battery electric vehicles from 10% to 35%, range-extender electric vehicles from 15% to 35%. Preferential tiers for Thai-produced vehicles are still under discussion; the supporting ministerial regulation remains a draft.
Jump to: Vietnam updates (4)|Thailand updates (3)|Indonesia updates (2)|Malaysia updates (2)|Other developments at a glance
Vietnam Updates
1. 2027 regional minimum wage raised: Decree 399/2026 issued 11/02, effective 2027/01/01
Issued 2026/11/02|Effective 2027/01/01 Applies to: companies employing local staff in Vietnam; labor-intensive industries are affected most directly
What happened
Vietnam's Deputy Prime Minister Phạm Thị Thanh Trà signed Decree (Nghị định) 399/2026/NĐ-CP for the government: issued 2026/11/02, effective 2027/01/01, replacing Decree 293/2025/NĐ-CP. Per LuatVietnam's full-text English translation and Vietnamese reports:
- Monthly minimum wage: Region I VND 5.7 million, II VND 5.08 million, III VND 4.45 million, IV VND 4.04 million, each up VND 310,000 to 390,000 per month (vs Decree 293/2025/NĐ-CP).
- Hourly wage: Region I VND 27,400.
- Cross-region application: Industrial parks, export processing zones and high-tech parks spanning wage regions all apply the highest; it also covers independent units and branches, and application after administrative units merge or split.
- Existing benefits may not be reduced: Under Article 5, Clause 3, employers must review and adjust labor contracts and internal rules and may not cancel or cut benefits such as overtime pay and night-shift allowances because of the wage increase; more favorable terms stay valid unless the parties agree otherwise.
Where readers most often get it wrong
- The decree does not state the percentage increase: It gives amounts and increases only; the average-increase figure in the market is calculated from the two decrees' amounts; the decree gives no such figure.
- Base pay is not the only field to change: It feeds the overtime pay base, the social insurance base and base-pay-derived allowances, so HR and finance grade tables must change together.
- The adjustment must be reflected in payroll for the period starting 2027/01/01: Finish simulations and policy updates before year-end.
- The original text in the official gazette has not been located: As of 2026/11/06 we have not found the full text in Vietnam's official gazette (Công báo); this item rests on that translation and media reports. Article 5, Clause 2 ends Decree 293/2025/NĐ-CP on the effective date; Clause 3 is the implementation provision for labor contracts and benefits.
What companies can do first
- List grades now near the minimum wage and count employees in Regions I to IV.
- Simulate knock-ons for overtime pay, night-shift allowances and the social insurance base, then confirm next year's headcount budget.
- Check labor contract, pay policy and collective agreement wording; more favorable terms must not be lowered with the adjustment.
Sources: LuatVietnam (English translation of the decree), Thanh Niên, VnEconomy
2. Building-material energy labelling roadmap: Circular 81/2026 issued 11/04, effective 2027/01/01
Issued 2026/11/04|Effective 2027/01/01 Applies to: companies producing or importing listed building materials in Vietnam, such as architectural glass, exterior paint and metal roofing panels
What happened
Nguyễn Văn Sinh signed Vietnam's Ministry of Construction (Bộ Xây dựng) Circular (Thông tư) 81/2026/TT-BXD (the page does not state his title). Per that page on Vietnam's government gazette system, it was issued 2026/11/04, effective 2027/01/01; Vietnam Government News covered it 2026/11/05. Two groups:
- Group 1, mandatory labelling from 2029/01/01: architectural glass, water-based exterior paint, metal roofing panels and metal cladding panels.
- Group 2, mandatory labelling from 2031/01/01: foam insulation boards, non-fired masonry blocks (including autoclaved aerated concrete blocks and wall panels, and lightweight concrete blocks and panels), and ceiling and partition boards.
- Inclusion criteria (three): (1) used in the building envelope, with thermal performance affecting energy efficiency; (2) a published thermal performance test method exists; (3) verifiable at an accredited lab.
- Voluntary early labelling: Producers and importers may label before the mandatory dates.
- Declaration method: Producers or importers declare electronically to Vietnam's Ministry of Construction, which publishes them on its portal; companies must also publish them on their own sites. If the system is not ready, the ministry will announce an alternative.
Where readers most often get it wrong
- Not every building material is listed: Materials failing any of the three criteria are off it; do not treat a whole category as regulated.
- 2027/01/01 is the circular's effective date, not the mandatory labelling date: Those fall in 2029 and 2031; the gap lets producers prepare testing and declarations.
- This is declaration and publication, not certification: Per reports, the ministry and the companies each publish them.
- The standard numbers for the test methods have not been checked one by one in this newsletter: The Vietnam Government News summary lists several Vietnamese national standard (TCVN) numbers; we have not obtained the circular's annexes to check them, so rely on its original text.
What companies can do first
- Check both lists for the group your Vietnam-produced or imported building materials fall in, and which date applies.
- Inventory existing test reports' items and validity periods, and confirm a Vietnam-accredited lab issued them.
- Match product specs, test reports and batch numbers; declaration and record retrieval are by batch.
Sources: Vietnam government gazette system (document page), Vietnam Government News
3. Gasoline excise tax cut to 0%, average power price down 2%: both carry period or structural conditions
In effect|Gasoline tax through 2027/03/31 Applies to: companies with factories in Vietnam and heavy power use, or with vehicle fleets and gasoline purchases
What happened
Two things happened at once, each with its own basis and period:
- Gasoline excise tax: Vietnam's Deputy Prime Minister Nguyễn Văn Thắng signed government Resolution (Nghị quyết) 45/2026/NQ-CP on 2026/10/31: excise tax (thuế tiêu thụ đặc biệt) on all types of gasoline cut to 0% for 2026/11/01 to 2027/03/31; under the resolution, Vietnam's Ministry of Industry and Trade may propose shortening or extending it.
- Average retail electricity price: Vietnam Electricity (EVN) (Tập đoàn Điện lực Việt Nam) cut the average retail price by 2% to VND 2,159.9037 per kWh (before tax) under Decision (Quyết định) 1305/QĐ-EVN (issued 2026/10/30), from 2026/11/01.
- Prices by customer group: Vietnam's Ministry of Industry and Trade (Bộ Công Thương) Decision 2892/QĐ-BCT, signed 2026/10/31, effective 2026/11/01, sets retail prices for each customer group and electricity-selling unit.
- Fiscal impact: Per Vietnam Government News, 2026/11/05, Nguyễn Đức Chi, Deputy Minister of Vietnam's Ministry of Finance (Bộ Tài chính), told the government's regular October press conference the ministry estimates the 0% rate will cut revenue by nearly VND 7 trillion (the original says 7,000 tỷ đồng).
Where readers most often get it wrong
- The 0% gasoline tax has an end date, and the period can be adjusted: It runs through 2027/03/31, and under the resolution the Ministry of Industry and Trade may propose shortening or extending it; rely on its period clause.
- It applies to "all types of gasoline": That means gasoline (xăng các loại), not all fuels; diesel taxes and fees sit under other provisions and are outside this change, so freight costs do not fall.
- "Average power price down 2%" does not mean production power use down 2%: The average retail price is weighted; prices by customer group, voltage level and period are set separately under Decision 2892/QĐ-BCT, so your actual change depends on the tier and period that apply.
- Peak and off-peak hours are covered by a separate decision: The new framework is under Ministry of Industry and Trade Decision 963/QĐ-BCT (signed 2026/04/22); whether it applies from this price adjustment rests on Vietnam Electricity or ministry announcements.
What companies can do first
- Get your plant's new customer-group tariff and time-period table from the utility, and check whether your voltage tier changed.
- On three-period pricing, confirm the peak and off-peak bands now in force, then review production scheduling and timing.
- Settle how electricity costs are allocated by production line or order.
- Simulate fleet and company-car fuel budgets at the new rate, but build in the 2027/03/31 end.
Sources: Vietnam Tax and Customs Magazine, Báo Đấu thầu, Vietnam News Agency, Chinese edition, Vietnam Government News
4. Two draft customs circulars: compliance tiering and machinery duty-exempt for over 10 years
Drafts|Effective date not set Applies to: manufacturers engaged in import and export or export processing in Vietnam, or with duty-exempt imported equipment
What happened
Vietnam Customs Department (Cục Hải quan) recently put two draft circulars (Thông tư) out for consultation; neither is issued:
- Customs compliance and risk management tiering: Per Vietnam Finance Times on 2026/11/03 and VIR on 2026/11/04, the draft would replace Circulars 81/2019/TT-BTC and 06/2024/TT-BTC and tier companies by compliance record and cooperation. High-risk companies face stronger supervision and inspection, compliant ones may get support measures; tiers can be reassessed if company information or compliance changes. Vietnam's Ministry of Finance sought comments 2026/09/28 via Official Letter (Công văn) 15295/BTC-CHQ, getting 40 responses.
- Machinery and equipment imported duty-exempt for over 10 years: Per Vietnam Tax and Customs Magazine, 2026/11/04, another draft would replace Circulars 38/2015/TT-BTC, 39/2018/TT-BTC and 121/2025/TT-BTC, with two options for machinery exempt from or not subject to import duty, imported over 10 years ago, fully depreciated and unused in production or business. Option one: if use changed without declaring and paying tax to customs, tax payable runs from the change of use. Option two: no declaration to customs, but VAT, excise tax and environmental protection tax (if any) must be declared and paid to the tax office.
Where readers most often get it wrong
- Both are drafts with no effective date: As of 2026/11/06 we have not found either issued or published; do not adjust operations on draft content.
- Tiering does not mean exemption from inspection: The reported "compliant companies may receive support measures" lists no specific measures, and the draft does not map tiers to inspection frequency; a compliant rating is not an exemption.
- The duty-exempt machinery draft does not state EPE coverage: The reports do not say whether export processing enterprises (doanh nghiệp chế xuất, EPE) are covered, and give no article numbers; which option applies cannot be determined until the full draft is published.
- An official letter is not a normative legal document: Official Letter 15295/BTC-CHQ has no legal rank and creates no obligations; obligations arise only once the circular is formally issued.
What companies can do first
- Check that customs declaration data, material write-offs and book figures reconcile for the past three years; past records set the rating.
- Inventory duty-exempt imported machinery now fully depreciated and idle, and match fixed asset cards, depreciation records and that year's declarations.
- Before disposing of or reselling old equipment, check whether a change of use is involved; current rules and the draft differ, so we suggest waiting for the official circular.
Sources: Vietnam Finance Times, VIR, Vietnam Tax and Customs Magazine
Thailand Updates
5. Solar panel imports must link to a TISI e-permit: Customs Announcement 132/2569 applies from 10/30
Applicable|From 2026/10/30 Applies to: companies importing crystalline silicon photovoltaic modules or panels into Thailand, or with rooftop solar or green power projects
What happened
Thai Customs Department (กรมศุลกากร) Announcement No. 132/2569 (ประกาศกรมศุลกากรที่ 132/2569) requires imported modules or panels of crystalline silicon photovoltaic cells under tariff code 8541.43.00-000 to link to Thai Industrial Standards Institute (TISI) (สำนักงานมาตรฐานผลิตภัณฑ์อุตสาหกรรม, สมอ.) electronic permit or certificate data from 2026/10/30. Legal basis: the ministerial regulation (กฎกระทรวง) on crystalline silicon solar panel standards, Royal Gazette (ราชกิจจานุเบกษา) Volume 143, Part 68ก of 2026/10/29.
Per a Thai media report of 2026/10/03 on that draft (standard มอก. 61730 เล่ม 2-2567), manufacturers or importers must first obtain a TISI permit; modules already assembled into other products are excluded.
Where readers most often get it wrong
- "Excluded if already assembled into other products" comes from reporting at the draft stage: As of 2026/11/06 we cannot access the Royal Gazette original; the published ministerial regulation or TISI guidance governs that exclusion's scope. Until that text is confirmed, assembled modules cannot be assumed exempt from the e-permit.
- The announcement does not state a transition period: Guidance on panels already imported or being installed was not published when we checked.
- The page does not state the announcement's issue date: It shows only the application date, 2026/10/30, the last update time and no signatory, so the date for this item is the application date, 2026/10/30.
What companies can do first
- Inventory photovoltaic module purchases not yet at port, and confirm the importer and whether a TISI permit or certificate is in hand.
- Ask the installer or supplier for the permit or certificate number, and confirm it links to customs system permit data at declaration.
- Register panels already imported or being installed; guidance will say what to supplement.
- Leave time in the construction schedule for clearance paperwork.
Sources: Thai Customs Department announcement, กรุงเทพธุรกิจ (background on the standard's scope)
6. Excise tax on imported EVs raised to 35%: cabinet approved 11/03, preferential tiers for Thai-made vehicles still under discussion
Cabinet approved|Supporting rule in draft Applies to: automotive and parts supply chains, and companies with fully built vehicle import business in Thailand
What happened
Per Thai media reports of 2026/11/03, Thailand's cabinet, at that day's mobile cabinet meeting (ครม.สัญจร), approved raising excise tax (ภาษีสรรพสามิต) on imported fully built electric vehicles:
- Rates: For fully built imports (CBU), battery electric vehicles (BEV) go from 10% to 35%, range-extender electric vehicles (REEV) from 15% to 35%. Per ฐานเศรษฐกิจ the same day, this applies from 2027/01/01.
- Target: Per reports, Thailand's Deputy Prime Minister and Minister of Finance Ekniti Nitithanprapas said it targets imported vehicles not produced in Thailand and not using local parts.
- Tiers for Thai-made vehicles are still under discussion: Per กรุงเทพธุรกิจ of 2026/11/05 and เดลินิวส์ of 2026/11/06, Thailand's Ministry of Finance and Excise Department (กรมสรรพสามิต) are separately discussing tiers under a "1+3" structure. 2% now applies to vehicles produced in Thailand with Thai-made key parts (such as batteries); those meeting the "Made in Thailand" (MiT) standard would be about 10%, those assembled in Thailand but below the threshold about 15% to 20%. Reports call the latter two estimates, not adopted criteria.
- Direction for recognizing local content: Per the same reports, it would be counted from verifiable Thai-made physical parts, with a target of about 40% and a roughly three-year implementation period for manufacturers.
Where readers most often get it wrong
- Only the 35% tier for fully built imports has been approved: The other tiers' rates, the local content threshold and the three-year period are unapproved proposals or media estimates; do not write them as published rules.
- The supporting ministerial regulation is still a draft: Per reports, it is scheduled to take effect together with 2027/01/01; as of 2026/11/06 we have not found it published in the Royal Gazette.
- The rule targets imported fully built vehicles, not parts makers: Parts manufacturers are not taxpayers under it.
- The tier structure appears in only one media outlet: The "1+3" structure, the 2% rate and the separate 10% tier were not mentioned by the other two outlets: a single-source account, not corroborated by other reporting or any official document.
What companies can do first
- Automotive and parts supply-chain companies should inventory the origin and supporting documents for their part numbers; with local content counted from physical parts, documents are key.
- Companies importing fully built vehicles should put 2027/01/01 into next year's import plan and quotation assumptions; the rate is subject to the official rule.
- Track the ministerial regulation's publication, and fix no tier's rate in quotations or contracts before the official rule is issued.
Sources: The Nation Thailand, ฐานเศรษฐกิจ, กรุงเทพธุรกิจ, เดลินิวส์
7. 3,049 waste treatment plants nationwide inspected in groups, with new licenses of the same type put on hold
Under way|From 11/01 Applies to: manufacturers with factories in Thailand that outsource industrial waste collection and treatment
What happened
Per กรุงเทพธุรกิจ, 2026/11/01, Varawut Silpa-archa, Minister of Thailand's Ministry of Industry (กระทรวงอุตสาหกรรม), announced group inspections of 3,049 Category 105 and 106 waste treatment plants from 2026/11/01: Groups A and B (10 provinces) in November, the other 66 provinces and Bangkok in December.
Progress and dispositions, per Thai media reports from 2026/11/03 to 11/05:
- Day one: 80 plants inspected; 1 ordered suspended, 63 plants given a deadline to improve, 3 facing license revocation.
- Day two: another 91 plants, for a two-day total of 171 plants.
- New licenses on hold: New licenses for Category 105 and 106 plants are on hold.
- Handling of repeat violations: Per the Thai Minister of Industry, the Director-General of Thailand's Department of Industrial Works (กรมโรงงานอุตสาหกรรม) is to handle cases under Section 37 (improvement within a deadline) and Section 39 (suspension of operations) of Thailand's Factory Act (พระราชบัญญัติโรงงาน); the deadline is set once, not extended, with reports citing 60, 80 or 90 days. Day-one dispositions followed: 63 plants to improve under Section 37, 1 suspended and to improve under Section 39 — a ministerial instruction, no announcement number.
Where readers most often get it wrong
- The inspections target Category 105 and 106 waste treatment plants: The outsourced treatment partners are affected, not the manufacturers commissioning them.
- The hold on new licenses is currently a ministerial instruction: We found no formal order number or end date, and reports do not explain the exemption conditions or how existing plants are affected.
- Cross-agency legislative amendments are still under discussion: Per a report quoting the Permanent Secretary of Thailand's Ministry of Industry, it is also discussing with the Anti-Money Laundering Office (AMLO) making illegal industrial waste dumping a predicate offense to money laundering — not yet law in force.
What companies can do first
- Confirm whether your waste treatment partners are Category 105 or 106, their province, and whether they were inspected.
- Line up backup treatment partners now.
- Keep waste volume, collection manifest and fee records together; you may be asked for matching data.
Sources: กรุงเทพธุรกิจ (inspection scale), เดลินิวส์ (day-one results), Post Today (day two), Amarin TV (cumulative), กรุงเทพธุรกิจ (Factory Act handling)
Indonesia Updates
8. Two official views on the tax holiday: one says no extension for now, the other says it will continue
Pending decision|Two official views side by side Applies to: companies planning to build or expand plants in Indonesia that included the tax holiday in their investment calculations
What happened
On 2026/11/04 and 11/05, two Indonesian government statements pointed different ways — both officials' remarks to media; there is no repeal order and no amended regulation:
- The Ministry of Finance side (11/04): Per DDTCNews, Melani Dewi Astuti, a senior analyst at Indonesia's Ministry of Finance fiscal and economic strategy agency, said the tax holiday under Minister of Finance Regulation (Peraturan Menteri Keuangan, PMK) 69/2024 will not be extended for now, being incompatible with the global minimum tax (Pajak Minimum Global); applications closed 2025/12/31 and approved holders can use it until expiry.
- The Coordinating Ministry for Economic Affairs side (11/05): Per DDTCNews, Airlangga Hartarto, Indonesia's Coordinating Minister for Economic Affairs, told a press conference the government will keep offering incentives including the tax holiday to attract foreign investment and will watch amendments; the report therefore says PMK 69/2024 may be amended, without content or timing.
- Top-up tax rules remain: Per the same statement, approved holders can use the holiday until expiry, but multinational groups within the global minimum tax's scope must still top up any portion where the effective tax rate is below 15%. The threshold is under Indonesia's Minister of Finance Regulation 136/2024 (PMK 136/2024); rely on its original text.
Where readers most often get it wrong
- Both are only officials' remarks: As of 2026/11/06 there is still no repeal order or amended regulation; PMK 69/2024 text is unchanged.
- The top-up tax involves only large multinational groups that meet the threshold: Rely on Regulation 136/2024's original text for the threshold; do not conflate the two matters.
- "Approved holders can use it until expiry" comes only from the Ministry of Finance side: The Coordinating Ministry's statement does not address it; projects already holding approval should follow their original approval conditions.
What companies can do first
- For investment calculations on new Indonesian plants, run two scenarios: no tax holiday, and incentives still available after amendment; finalize once the regulation appears.
- For projects already holding approval, confirm the start and end dates and conditions on the approval document, and execute under them.
- Groups within the global minimum tax's scope should confirm how the effective tax rate is calculated; top-up rules and the incentive follow separate logic.
Sources: DDTCNews (Ministry of Finance statement), DDTCNews (Coordinating Ministry statement)
9. Coretax weekend downtime for maintenance: 11/07 17:00 to 11/08 18:00
Official notice|Downtime from 2026/11/07 17:00 Applies to: companies in Indonesia that issue e-invoices or file and pay taxes
What happened
Indonesia's Directorate General of Taxes (Direktorat Jenderal Pajak, DJP) announced on its website that Coretax will be down for maintenance from 2026/11/07 (Saturday) 17:00 to 2026/11/08 (Sunday) 18:00 (Western Indonesia Time, WIB); coretaxdjp.pajak.go.id will be unavailable then.
Where readers most often get it wrong
- The official notice page does not state a publication date or number: When we checked, the page held only the notice body, with no publication date or document number to check against.
- The downtime is in Western Indonesia Time (WIB): That is 18:00 on 2026/11/07 to 19:00 on 11/08, UTC+8; plan on the converted times.
- Secondary reports have contained errors: A professional outlet misreported the end date; rely on the Directorate General of Taxes notice.
What companies can do first
- Complete any e-invoices (e-Faktur) needed over the weekend before the 11/07 afternoon downtime.
- Handle filings and tax payments due on these two days early, or after the evening of 11/08.
- Tell finance and invoicing staff the downtime window so no one is caught out on the day.
Sources: Indonesia's Directorate General of Taxes website notice
Malaysia Updates
10. E-invoice analytics flag over 7,700 potential risk cases
Official briefing|Not a new rule Applies to: companies already live on e-invoicing in Malaysia
What happened
Per The Star on 2026/11/04, Abu Tariq Jamaluddin, chief executive of Malaysia's Inland Revenue Board (Lembaga Hasil Dalam Negeri, LHDN), said MyInvois's advanced analytics anomaly detection model has flagged over 7,700 potential tax risk cases needing audit and investigation; the same report gives 408,726 audits and investigations so far this year, with additional tax of RM 7.7 billion (the original gives no statistics cut-off date). The board's press release confirms the occasion but does not list these figures.
Where readers most often get it wrong
- This is an official briefing, not a new rule: Existing e-invoicing obligations and thresholds are unchanged; it signals enforcement intensity.
- A "potential risk case" does not mean evasion has been established: The 7,700 are model-flagged cases awaiting audit and investigation, not confirmed violations.
- The figures come from media quotes: The additional tax and case counts come from The Star's report, not the press release page.
What companies can do first
- Spot-check that recent e-invoice, accounting and filing data are consistent.
- For voided documents and credit adjustments, confirm the e-invoice handling was completed.
- For transactions with overseas related parties, confirm the invoicing and filing entity match.
Sources: Malaysia's Inland Revenue Board press release, The Star
11. Stricter approval of new manufacturing licenses: applicants reliant on foreign workers with duplicated business will be scrutinized
Minister's remarks|No implementing rules seen Applies to: companies planning to set up or expand plants in Malaysia or apply for new manufacturing licenses
What happened
Per TV Sarawak on 2026/11/02 and The Star on 2026/11/03, Johari Abdul Ghani, Minister of Malaysia's Ministry of Investment, Trade and Industry (Kementerian Pelaburan, Perdagangan dan Industri, MITI), said in reply to questions in the Dewan Rakyat:
- Role of foreign workers: The outlets differ: TV Sarawak reported foreign workers used "only" in dirty, dangerous and difficult (3D) jobs, The Star that they "should mainly" be used in 3D jobs.
- Approval of new licenses: Applicants for new manufacturing licenses that rely on foreign workers and duplicate existing operators' business will face stricter approval.
Where readers most often get it wrong
- This is a minister's reply in parliament, not a published approval standard: As of 2026/11/06 we have not found implementing rules, guidelines or a formal announcement.
- "Stricter" has no quantified threshold: The reports do not give a specific foreign worker ratio or an effective date.
- This is separate from the multi-tier levy on foreign workers: No new progress this issue on the multi-tier foreign worker levy (MTLM); do not conflate the two.
What companies can do first
- For projects applying for a new manufacturing license, prepare an account of foreign worker dependence and local hiring plans.
- Inventory foreign worker allocation across 3D and non-3D jobs on existing lines.
- If a new project's product overlaps with existing operators in Malaysia, prepare a differentiation case — process, customer segment or local value-add.
Sources: TV Sarawak, The Star
Other Developments at a Glance
- Vietnam|Foreign investment data for the first 10 months: Vietnam's National Statistics Office (Cục Thống kê) announced on 2026/11/03 that, as of 10/31, registered foreign investment reached USD 54.85 billion, up 74.0% year on year, estimated disbursement USD 24.08 billion, up 13.1%, and October's industrial production index up 15.0% year on year. [[Source]](https://www.nso.gov.vn/bai-top/2026/11/bao-cao-tinh-hinh-kinh-te-xa-hoi-thang-muoi-va-10-thang-nam-2026/)
- Vietnam|National Assembly session progress: At the second session of Vietnam's 16th National Assembly, draft amendments to the Law on Investment and the Law on Electricity were discussed on 11/02 and 11/03, neither put to a vote; the first phase runs to 11/14, the second 11/20 to 11/21. [[Source]](https://baolaocai.vn/thong-cao-bao-chi-so-15-ky-hop-thu-2-quoc-hoi-khoa-xvi-post913399.html)
- Vietnam|Customs and the foreign-invested enterprise association set up a cooperation mechanism: Per Vietnam Tax and Customs Magazine, 2026/11/05, Vietnam Customs Department signed an agreement with the Vietnam Association of Foreign Invested Enterprises (VAFIE) covering information exchange, forwarding members' difficulties every 6 months or on request, and consultation on draft customs and tax policy documents — a cooperation mechanism, not a regulation. [[Source]](https://thuehaiquan.tapchikinhtetaichinh.vn/cuc-hai-quan-va-vafie-thiet-lap-co-che-hop-tac-ho-tro-doanh-nghiep-fdi-171686.html)
- Thailand|Timeline for the EU Deforestation Regulation: Per กรุงเทพธุรกิจ, 2026/11/04, Thailand's agricultural research and development agency said the National Single Window has registered over 2.2 million farmland plots. The EU Deforestation Regulation (EUDR) applies to large and medium operators from 2026/12/30, to ordinary micro and small operators from 2027/06/30; those already under the EU Timber Regulation (EUTR) remain at 2026/12/30. [[Source]](https://www.bangkokbiznews.com/economics/1259286)
- Thailand|Investment promotion applications: Per ฐานเศรษฐกิจ, 2026/11/06, Naruet Terdsatirasak, Secretary-General of Thailand Board of Investment (BOI), said applications in the first 9 months reached THB 1.7 trillion — the amount applied for, not capital committed; the national semiconductor strategy has three phases, focused on photonics, power electronics and sensors. [[Source]](https://www.thansettakij.com/economy/673081)
- Indonesia|Personal tax exemption proposed to rise: Per DDTCNews, 2026/11/05, the minister of Indonesia's Coordinating Ministry for Economic Affairs (Kementerian Koordinator Bidang Perekonomian) said the personal tax exemption (PTKP) will be raised in 2027 but not from January; a policy direction, not yet approved. The current amount for a single person with no dependents is IDR 54 million a year. [[Source]](https://news.ddtc.co.id/berita/nasional/1823885/batasan-ptkp-bakal-naik-kapan-mulai-berlaku)
- Indonesia|Scope of "oversight" for administrative sanction relief: Per DDTCNews, 2026/11/02, Indonesia's Directorate General of Taxes said "oversight" (khilaf) under Article 36 of the General Provisions and Tax Procedures Law (UU KUP) is broader than the cases listed in Article 27, Clause 3 of Minister of Finance Regulation 118/2024 (as amended by PMK 71/2026); relief can be requested outside those cases, but the tax office still reviews each case and approval is not guaranteed. [[Source]](https://news.ddtc.co.id/berita/nasional/1823757/djp-tegaskan-makna-khilaf-untuk-hapus-sanksi-pajak-lebih-luas)
- Malaysia|Service Tax Policy No. 3/2026, first amendment: The Royal Malaysian Customs Department (Jabatan Kastam Diraja Malaysia, JKDM) amended it on 2026/11/02: the minister has exempted from service tax non-residential property management fees and sinking funds that developers, joint management bodies (JMB) or management corporations (MC) collect from owners, from 2026/07/01 until the service tax regulations amendment is gazetted; tax for periods before 6/30 is still payable, and taxable services from third parties stay taxed as usual. [[Source]](https://mysst.customs.gov.my/service-tax-policy/)
- International|Two official dates for the 49th ASEAN Summit: Per Philippine News Agency, 2026/10/29, the summit is scheduled for 2026/11/16 to 11/18, hosted by the Philippines; the ASEAN Secretariat's public calendar as of 2026/07/15 lists 11/13 to 11/15. As of 2026/11/06 we found no formal signing record for the ASEAN Digital Economy Framework Agreement (DEFA). [[Source]](https://www.pna.gov.ph/article/cebu-pacific-adjusts-flights-ahead-of-asean-summit), [[ASEAN Secretariat calendar]](https://asean.org/wp-content/uploads/2026/07/Public-Calendar-ASEAN-2026-Notional-Calendar-as-of-15-July-2026.pdf)
- International|EU CBAM certificate price: Per the European Commission's price page, the third-quarter 2026 price is EUR 82.32 (published 2026/10/05); the fourth-quarter price is not yet published, due 2027/01/04 on that page. [[Source]](https://taxation-customs.ec.europa.eu/carbon-border-adjustment-mechanism/price-cbam-certificates_en)
Items We Are Tracking
- Original text of Vietnam Decree 399/2026/NĐ-CP in the official gazette, and transition arrangements: As of 2026/11/06 not found there.
- Full text of Thailand's ministerial regulation on crystalline silicon solar panels: Scope, exclusions and transition arrangements in Royal Gazette Volume 143, Part 68ก.
- Supporting ministerial regulation for Thailand's excise tax on imported EVs: Tier rates for Thai-made vehicles, the local content threshold and the implementation period, pending the official rule.
- Vietnam's two draft customs circulars: Compliance tiering and machinery duty-exempt for over 10 years, pending issuance and article numbers.
- Indonesia's amended regulation on the tax holiday: Pending the Indonesian Ministry of Finance's amendments to PMK 69/2024.
- Implementing rules for approving new manufacturing licenses in Malaysia: Pending guidelines from Malaysia's Ministry of Investment, Trade and Industry (MITI) or the Malaysian Investment Development Authority.
Need support?
Turning a regulatory change into day-to-day operations usually stalls on whether the data can be reconciled: the link between pay grades and overtime pay, consistency between customs declarations and material write-offs, matching of product test reports to batch numbers, and the allocation of waste manifests and fees. If you would like to start by taking stock of where your ASEAN plants stand today, please Submit an enquiry and the Digiwin Southeast Asia team will get in touch.
The regulations, announcements and reports cited in this newsletter are subject to the latest announcements of each country's competent authority. This newsletter separates the text of the law, regulator explanations, and media or professional-body interpretation; the content of media reports is attributed to its source, and no additional inference is drawn.