ASEAN Compliance Weekly No. 04|Vietnam's new work-permit decree applies from 5 Dec, Indonesia defers halal deadlines by group

Regulatory and policy changes across four ASEAN markets, 16 to 23 October 2026. Vietnam: Decree 393/2026/ND-CP governs foreign workers from 5 December, replacing 219/2025; Circular 27/2026/TT-BNV lists 31 occupational safety and health jobs from 1 January 2027; 24 November is already a paid holiday though the Labour Code amendment is still a bill. Thailand: cabinet approved duty-free imports of replacement machinery for flood-hit factories, pending Royal Gazette publication. Indonesia: PP 40/2026 defers halal deadlines by group. #ASEANregulation #FDI #ComplianceAbroad

Information as of 23 October 2026. This brief distinguishes between the text of a regulation, statements by competent authorities, and interpretation by media or professional institutions. Each item is labelled with its legal status and sources. Actual application should follow the latest announcements of each country's competent authorities.


Key ASEAN items this week

  1. Vietnam|New work-permit rules for foreign workers: Decree 393/2026/ND-CP applies from 5 December 2026 and replaces 219/2025, listing 18 categories not subject to work-permit issuance. The intra-corporate transfer exemption is limited to the 11 service sectors Vietnam committed to open under the WTO; manufacturers must assess this case by case and cannot assume it does or does not apply.
  2. Vietnam|Updated list of jobs with strict occupational safety and health requirements: Circular 27/2026/TT-BNV lists 31 jobs, effective 1 January 2027, replacing 06/2020, with no transitional provision.
  3. Thailand|Duty exemption on replacement equipment for flood-hit factories: approved by the Thai cabinet on 20 October 2026, exempt until 31 March 2027; it applies only to imports made on or after the measure is published in the Thai Royal Gazette (ราชกิจจานุเบกษา).


Jump to:Vietnam (4 items)|Thailand (2 items)|Indonesia (1 item)|Malaysia (1 item)|Other developments


Vietnam


1. New work-permit rules: Decree 393/2026 applies from 5 December, replacing 219/2025

 Issued|Not yet in force  Applies to: enterprises employing foreign managers or technical staff in Vietnam


What happened

The Vietnam Government Portal reported on 22 October 2026 that the Vietnamese government had issued Decree (Nghị định) 393/2026/ND-CP governing foreign workers in Vietnam, applying from 5 December 2026 and replacing Decree 219/2025/ND-CP. According to LuatVietnam, the decree was signed on 20 October 2026. Three points matter:


  1. 18 categories not subject to work-permit issuance: these include owners or capital-contributing members of limited liability companies with contributions of VND 3 billion or more, and chairs or board members of joint-stock companies meeting the same threshold.
  2. Procedure and deadlines: work permits are issued by the provincial People's Committee. The employer must apply at least 10 working days and no more than 60 days before the foreign worker's expected start date. Permits and extensions each run for a maximum of 2 years.
  3. Eligibility criteria appear to have been relaxed: under Article 4(3)(e) of the decree, an expert (chuyên gia) may qualify through "at least five years of work experience matching the intended position" as one of several routes, evidenced under Article 20(3)(e) by a confirmation of service from the overseas employer. The two-year experience requirement in Article 4(2)(b) applies to an executive director (giám đốc điều hành) who heads and directly manages a specific area of the organisation; heads of branches, representative offices and business locations under Article 4(2)(a) have no minimum-experience threshold.


Where this is most often misread

  1. "Short-term work" and "intra-corporate transfer" are two separate exemptions with different conditions and should not be merged.
  2. The 11-service-sector limit applies to intra-corporate transfers: the list of 11 sectors is set out in Appendix II to the decree. Manufacturing itself is not one of the 11 service sectors Vietnam committed to open under the WTO, but "other business services" include "services incidental to manufacturing" (CPC 884, 885). Two points matter: Vietnam made no commitment on printing (CPC 88442), which is excluded; and CPC 884 and 885 cover services provided to others, so a manufacturer that only makes its own products does not fall into that service sector by virtue of manufacturing. Whether a manufacturer's assignees qualify depends on the company's registered lines of business and the position transferred, and must be assessed case by case; it cannot be assumed that the exemption does or does not apply.
  3. "Not subject to work-permit issuance" does not mean no procedure: some categories still require a confirmation of non-applicability or notification to the competent authority, and a permit is still required once an employment, labour-use and salary-payment relationship arises.
  4. Transitional provisions remain to be confirmed: this brief has not obtained the text of Chapter V of the decree (Articles 35 to 37, listed by LuatVietnam as "implementation provisions"), so it cannot confirm whether transitional rules exist, nor whether permits issued before 5 December remain valid. No inference is drawn in either direction; please rely on the full text published by the Vietnamese authorities.
  5. The article numbers above were checked against a third-party reproduction of the text; the operative wording should follow the full text published by the Vietnamese government.


What enterprises can do first

  1. Before 5 December, re-inventory which foreign staff need permits and which do not.
  2. Confirm the company's registered lines of business and the actual duties of each assigned position before judging whether the intra-corporate transfer exemption applies.
  3. Consolidate start dates, contract periods, cumulative days in Vietnam and permit expiry dates into a single list. The application window is time-bound, and scattered records are where things get missed.


Learn more:Competing with Japanese and Korean plants for the same people: recruitment, retention and operating fitness at FDI factories in Southeast Asia


Sources: Vietnam Government Portal, LuatVietnam, VnEconomy


2. Updated list of jobs with strict OSH requirements: 31 jobs, effective 1 January 2027

 Issued|Not yet in force  Applies to: factories with welding and cutting, electroplating and spraying, chemicals, kilns, work at height or confined-space work


What happened

Vietnam's Ministry of Home Affairs (Bộ Nội vụ) issued Circular (Thông tư) 27/2026/TT-BNV on 20 October 2026, publishing the "List of jobs with strict occupational safety and health requirements" (Danh mục công việc có yêu cầu nghiêm ngặt về an toàn, vệ sinh lao động), comprising 31 jobs. These cover chemicals, metal welding and cutting, electroplating and spraying, kilns, work at heights of 2 metres or more, confined spaces, and operation of machinery subject to safety technical inspection.


  1. 1 January 2027: effective, replacing Circular 06/2020/TT-BLDTBXH
  2. The text states that the earlier circular ceases to be effective when the new one takes effect, with no transitional provision


Where this is most often misread

  1. These are 31 "jobs", not 31 industries or 31 occupational classes. The test is the work performed on the floor, not the company's industry classification.
  2. No transitional provision: the old and new lists change over on 1 January 2027, with no grace period.


What enterprises can do first

  1. Map the new list against your own production lines and identify which jobs are covered and who performs them.
  2. Review training and inspection records for certified personnel and confirm they can be complete before 1 January 2027.
  3. Training schedules usually require cross-department coordination, so align production, HR and safety timelines early.


Learn more:Three things to prepare before introducing MES at a Southeast Asian factory


Sources: Vietnam legal document system, Vietnam Law Library


3. 24 November is already a paid holiday in Vietnam: the Labour Code amendment is still under review

 Resolution in force|Amendment under review  Applies to: employers in Vietnam, particularly shift-based production lines


What happened

The legal basis for paid leave on 24 November, Vietnam Culture Day, already exists and is not a draft. Vietnam's National Assembly (Quốc hội) Resolution (Nghị quyết) 28/2026/QH16 on the development of Vietnamese culture was passed on 24 April 2026 and took effect on 1 July 2026. Article 2(1) provides that 24 November each year is Vietnam Culture Day and that employees take the day off on full pay. The date was originally set by Resolution No. 80-NQ/TW of the Politburo of the Communist Party of Vietnam (January 2026); a Politburo resolution is a Party document, not a legal normative document.


The new development, as reported by Vietnam News Agency and Xinhua on 21 October, is that Minister of Home Affairs Nguyen Tien Hai submitted to the National Assembly on 21 October 2026 a combined bill amending five laws in the home-affairs field, writing the resolution into the Labour Code (Bộ luật Lao động) 45/2019/QH14. The bill also proposes moving labour subleasing (cho thuê lại lao động) from a licensing regime to a notification regime.


Where this is most often misread

  1. The current legal basis for the paid holiday is the National Assembly resolution, not the holiday list in Article 112 of the current Labour Code. That list has not yet been amended, so not finding 24 November in the Labour Code is normal and does not mean the day is not off.
  2. The amendment itself is still a bill. The five laws must be amended before 1 March 2027; no vote has been taken.
  3. Counts of the total number of statutory paid holidays in Vietnam differ between sources, so this brief does not cite a total.


What enterprises can do first

  1. Confirm that rosters for 24 November 2026 already treat the day as paid leave, especially on shift-based lines.
  2. Check that attendance, rostering and overtime calculation rules have been updated together, as these three are linked.
  3. If labour subleasing moves to a notification regime, lead times for staffing will change; confirm this with existing suppliers.


Learn more:Compliance reminders for the establishment stage: labour regulation and human resources


Sources: Vietnam Law Library (full text of Resolution 28/2026/QH16), Vietnam Government Portal, Vietnam News Agency


4. Vietnam's e-invoice system upgraded in stages: VAT return drafts generated from November

 System schedule|Not a new regulation  Applies to: enterprises issuing or receiving e-invoices in Vietnam


What happened

According to Tạp chí Kinh tế Tài chính, a journal under Vietnam's Ministry of Finance, on 20 October 2026, the Vietnam Tax Department (Cục Thuế) is upgrading its e-invoice (hóa đơn điện tử) system in four stages between September and December. The legal basis, Decree 254/2026/ND-CP and Circular 91/2026/TT-BTC, was signed on 30 June 2026 and took effect on 1 July 2026. This is a system schedule, not a new regulation.


  1. From October: facial or OTP verification extended to applications to change e-invoice registration details (new applications and changes of legal representative were already covered).
  2. From November (four items in parallel): applications for single-invoice issuance (form 06/ĐN-PSĐT); checking of erroneous invoices under Decision (Quyết định) 1233/QD-CT of 27 August 2026; automatic generation of draft VAT returns and refund suggestions from existing e-invoice data; and a move to the XAdES digital signature standard.
  3. From December: the K-coefficient early-warning rule applies to enterprises in 7 industries and household businesses in 6 industries.


Where this is most often misread

  1. This is an administrative system upgrade, not a new regulatory obligation. The legal basis already took effect on 1 July.
  2. Do not read it as "fully mandatory from October": this brief has not obtained a formal document from the Vietnam Tax Department (Cục Thuế), and the exact application date, national scope and the types of changes covered remain to be confirmed.
  3. The industries covered by the December K-coefficient rule were not named in the original report, and this brief does not supply them.


What enterprises can do first

  1. From November the system will generate draft VAT returns automatically. Confirm first how your own ledger figures reconcile to invoice data, otherwise it is hard to see where a draft diverges.
  2. If you plan to change e-invoice registration details soon, confirm the responsible person's verification method is ready.


Learn more:ASEAN Compliance Weekly No. 02


Sources: Tạp chí Kinh tế Tài chính, KPMG Vietnam


Digiwin events (information from the publisher of this brief, not from competent authorities)

  1. Friday 30 October Vietnam VAT refund rules and four-document consistency in practice|additional online session


View event details and register


Thailand


5. Duty exemption on replacement equipment for flood-hit factories: approved by cabinet, pending Royal Gazette publication

 Cabinet approved|Pending gazette  Applies to: qualifying factories located in officially declared disaster areas in Thailand


What happened

According to The Nation Thailand and Thailand's กรุงเทพธุรกิจ on 20 October 2026, the Thai cabinet approved the Finance Ministry's flood tax relief package the same day. Qualifying factories and hotel operators located in officially declared disaster areas may import new machinery, parts and equipment to replace or repair flood-damaged equipment free of import duty until 31 March 2027.


Lavaron Sangsnit, Permanent Secretary of Thailand's Ministry of Finance, explained that the exemption applies only to imports made on or after the measure is published in the Thai Royal Gazette (ราชกิจจานุเบกษา). The remaining conditions should be read item by item:


  1. The goods must be used in the qualifying operator's own business.
  2. The importer must be the qualifying operator itself, or a dealer with a sales contract with that operator.
  3. A damage certificate issued by the Industrial Estate Authority of Thailand (การนิคมอุตสาหกรรมแห่งประเทศไทย, IEAT), a provincial industry office or a local administrative authority must be presented to the Thai Customs Department (กรมศุลกากร).


Where this is most often misread

  1. Cabinet approval does not mean the exemption is in force. The Royal Gazette publication date governs; equipment imported before publication does not qualify.
  2. As of 23 October 2026 this brief's searches found no record of Royal Gazette publication. That is a search result, not proof that no announcement exists.
  3. The damage certificate must be issued by a designated authority, not self-declared.


What enterprises can do first

  1. Confirm the application procedure and documents for a damage certificate with the IEAT, the provincial industry office or the local administrative authority.
  2. Prepare the list of damaged equipment, together with specifications and quotations for repair or replacement, so filing can begin as soon as the gazette is published.
  3. Decide the cost accounts for repair costs and replacement equipment before import, to avoid chasing documents afterwards.


Learn more:ASEAN Compliance Weekly No. 01


Sources: The Nation Thailand, กรุงเทพธุรกิจ


6. Thailand steps up inspections of waste treatment and recycling factories: Factory Act amendment under review

 Administrative directive|Amendment under review  Applies to: factories that outsource industrial waste treatment


What happened

According to MGR Online on 19 October 2026, Thailand's Minister of Industry (กระทรวงอุตสาหกรรม) Varawut Silpa-archa, after inspecting a non-compliant waste factory in Prachinburi, instructed provincial industry offices to accelerate inspections of category 105 and 106 (waste treatment and recycling) factories nationwide. Thailand's Factory Act (พ.ร.บ.โรงงาน) amendment is under review by a special committee of the House of Representatives (สภาผู้แทนราษฎร), and the minister has argued for heavier penalties.


According to The Nation Thailand on 22 October 2026, Thailand's Department of Business Development (กรมพัฒนาธุรกิจการค้า, DBD) will conduct on-site inspections of 44 waste-related companies with foreign shareholders in Prachinburi identified through its business intelligence analysis system (41 non-hazardous, 3 hazardous). Separately, 4 companies were earlier assessed as showing conduct suggestive of Thai nominee shareholders and referred to law enforcement.


Where this is most often misread

  1. Being in the at-risk group does not mean a breach has been established. The 44 companies are subjects of inspection; the source uses "at-risk", not "high risk", and does not state whether the 4 companies above are among the 44, so this brief draws no inference.
  2. Two figures use different bases: a separate figure of "2,863 nationwide" refers to waste-related companies with foreign shareholding as at 30 September 2026, which is not the same population as category 105 and 106 factories. The two should not be mixed or added.
  3. The Factory Act amendment is still under review, and heavier penalties are not settled.


What enterprises can do first

  1. Confirm whether your waste contractor is a lawfully registered category 105 or 106 factory.
  2. Organise waste output volumes, transport records and treatment costs so they can be produced in one go if requested.
  3. These three records normally sit with production, general affairs and finance, so confirm who consolidates them.


Learn more:Three things to prepare before introducing MES at a Southeast Asian factory


Sources: MGR Online, The Nation Thailand


Indonesia


7. Indonesia's PP 40/2026 defers halal certification deadlines by group: whether domestic food and beverage from medium and large enterprises is also deferred is disputed

 Published|In force  Applies to: enterprises producing in or exporting to Indonesia food and beverage, cosmetics, medicines and related products


What happened

Indonesian Government Regulation (Peraturan Pemerintah, PP) 40/2026 amends PP 42/2024. According to the legal database of Indonesia's Halal Product Assurance Organizing Agency (BPJPH), the regulation was both enacted and promulgated on 14 October 2026 and is currently in force.


The deferral must be read by enterprise size and by domestic versus imported. Citing a single date reverses the conclusion:


  1. Domestic food and beverage, slaughter products and slaughter services from medium and large enterprises: status undecided. LPPOM MUI (19 October) states that the deadline already set in 2024 "does not automatically become 2028", and the deferral list from Assegaf Hamzah & Partners (16 October) covers only micro and small enterprises for domestic food and beverage. However, after Susiwijono Moegiarso, Secretary of Indonesia's Coordinating Ministry for Economic Affairs, briefed the public, The Jakarta Post (19 October) and ChemLinked both summarised it as "food, beverage and related services deferred to 2028" without distinguishing enterprise size. Both readings are set out here; please rely on the text of PP 40/2026 and BPJPH's subsequent technical rules.
  2. The same products from micro and small enterprises (UMK): previously 17 October 2026, deferred to 2028.
  3. Imported food and beverage, slaughter products and slaughter services: the obligation runs from 18 October 2028, conditional on progress of halal certificate mutual recognition agreements (MRA).
  4. Services related to food, beverage and slaughter products (excluding slaughter services): the obligation runs from 18 October 2028.
  5. Traditional medicines, quasi-drugs, health supplements, cosmetics, related chemical and genetically engineered products, certain consumer goods and class A medical devices: the transition period is extended to 17 October 2028 (Assegaf Hamzah & Partners gives 18 October).


Over-the-counter medicines and class B medical devices (17 October 2029) and certain prescription medicines and class C medical devices (17 October 2034) are unchanged.


Where this is most often misread

  1. "Halal certification deferred to 2028" cannot be applied to everyone in one sentence. Institutions read the position for domestic food and beverage from medium and large enterprises differently (see point 1 above); this brief sets out both readings rather than picking one.
  2. The 18 October 2028 date for imports is conditional on the progress of mutual recognition agreements, not an unconditional extension.
  3. 17 and 18 October are two sides of the same cut-off: Indonesian halal regulation conventionally describes it as "transition period until 17 October" and "obligation from 18 October". The two dates are not a one-day difference between categories.
  4. Whether each group falls on 17 or 18 October is summarised differently by different institutions: most place the UMK group and group 5 on 17 October 2028, while Assegaf Hamzah & Partners gives 18 October throughout. The year is consistent across sources. This brief has obtained the link to the regulation PDF reproduced by LPPOM MUI but has not completed a clause-by-clause check.
  5. Revocation of conformity assurance for foreign halal products: as interpreted by Assegaf Hamzah & Partners and The Jakarta Post, this regulation revokes the conformity assurance rules for foreign halal products, so pre-import verification is no longer an import requirement. Indonesia's official database likewise records that it revokes (mencabut) BPJPH Regulation No. 4 of 2026. That regulation's own entry still showed it as in force on 23 October, so please follow BPJPH's subsequent announcements for the actual repeal date and implementing arrangements.


What enterprises can do first

  1. Determine whether your Indonesian operation is a medium or large enterprise or a micro or small one. If it is medium or large and makes domestic food and beverage, both readings are currently live, so prepare on the basis that the obligation still applies and confirm against the text.
  2. Inventory domestic and imported lines separately, as deadlines and conditions differ.
  3. For lines already under the mandate, confirm certification progress and that the product list maps completely.


Learn more:ASEAN Compliance Weekly No. 02


Sources: BPJPH legal database, LPPOM MUI, Assegaf Hamzah & Partners, The Jakarta Post, pasardana


Malaysia


8. Malaysian e-invoice data now used in tax matching: more than 77,000 taxpayers filed

 Implemented|Ongoing  Applies to: enterprises operating in Malaysia


What happened

According to The Star on 20 October 2026, Malaysia's Ministry of Finance told Parliament in a written reply on 19 October that more than 77,000 taxpayers filed outstanding returns after being prompted by e-invoice data, declaring income of more than RM6.5 billion and tax payable of more than RM1.38 billion. According to The Star on 21 October, the Inland Revenue Board of Malaysia (Lembaga Hasil Dalam Negeri, LHDN) said it had received more than 2.09 billion e-invoices in total.


Where this is most often misread

  1. Filed returns are not the same as tax actually collected. These are different stages.
  2. The 2.09 billion figure is cumulative since e-invoicing went live, and the original report did not state a precise cut-off.
  3. The exemption threshold is not only about revenue: it was raised from annual revenue of RM1 million to RM3 million (announced on 30 August 2026, with LHDN issuing a statement on 31 August and version 4.8 of the e-Invoice General Guideline updated the same day, applying from 1 September 2026). Under that guideline the exemption does not apply where: a non-individual shareholder has annual revenue of RM3 million or more; the business is a subsidiary of a holding company with revenue of RM3 million or more; or a related company (as defined in section 2 of Malaysia's Promotion of Investments Act 1986) or joint venture has revenue of RM3 million or more. Sole proprietorships and partnerships must also aggregate revenue across the same owner. This brief could not obtain the guideline PDF itself, so no section number is cited. This is a specific legal test and must be applied company by company on shareholding and conditions. It should not be generalised into "group subsidiaries can never be exempt", nor judged on your own revenue alone.
  4. LHDN has clarified what a data discrepancy means: according to The Star on 21 October, Mohd Syazli Mokthar, who heads policy and compliance in LHDN's e-Invoice division, said the system applies data analytics to profile taxpayers' finances, but discrepancies may arise from accounting adjustments or filing timing and do not imply taxpayer culpability.


What enterprises can do first

  1. Include the revenue of the parent and related companies in the assessment, and work through the guideline point by point to confirm whether the exemption truly applies.
  2. E-invoice data is already used in matching, so confirm consistency across invoices, accounting records and filings.
  3. LHDN's e-Invoice special voluntary disclosure programme (full penalty waiver) runs to 31 December 2027; discrepancies can be handled through it.


Learn more:Malaysia's 2026 tax rules you need to know before entering the market


Sources: The Star (Ministry of Finance reply), The Star (LHDN cumulative volume), LHDN e-Invoice guidelines


Other developments

  1. Vietnam|Vietnam and EFTA signed a free trade agreement: signed in Hanoi on 18 October 2026. It was signed by Vietnam's Minister of Industry and Trade Le Manh Hung with the President of the Swiss Confederation Guy Parmelin, the Prime Minister of Liechtenstein Brigitte Haas, Iceland's Foreign Minister and Norway's State Secretary, after 14 years of negotiation. The agreement still requires ratification and is not yet in force; no ratification progress as of 23 October. This brief has not obtained a citable description of the tariff schedule or origin cumulation rules and will add them once the EFTA Secretariat or Vietnam's Ministry of Industry and Trade publishes the text. Source
  2. Thailand|A higher excise tax on fully imported EVs is still a proposal: According to Kaohoon International on 17 September 2026, Ekniti Nitithanprapas, Deputy Prime Minister and Minister of Finance, said the ministry was considering an excise tax of around 30% on fully built-up (CBU) electric vehicles. In the same report, Pornchai Thiraveja, Director General of Thailand's Excise Department (กรมสรรพสามิต), explained that Thailand's National Electric Vehicle Policy Committee approved in principle at its first 2026 meeting a three-tier structure based on the degree of local production and investment commitment; the rates for each tier have never been officially published. Media reports of 18 and 19 October citing "at least 30% at the top tier, to cabinet within two weeks, expected effective 1 January 2027" came from an unnamed ministry source; 1 January 2027 is a media expectation, not an official announcement. Under sections 5 and 16 of the Excise Tax Act B.E. 2560 (2017), Thai vehicle excise rates are set by the Minister of Finance by ministerial regulation (กฎกระทรวง) within the ceilings in the Act's schedule, not by royal decree; section 109 separately provides that a reduction or exemption is made by ministerial notification (ประกาศ) with cabinet approval. Both take effect on publication in the Thai Royal Gazette. Source
  3. Indonesia|Audits accelerate in Q4 and penalty relief must be applied for by 31 December: according to DDTC on 16 October and 22 October 2026, the Director General of Indonesia's Directorate General of Taxes (Direktorat Jenderal Pajak, DJP) called for accelerated supervision, audits and arrears collection over the final three months. Those seeking relief from administrative penalties under Director General of Taxes Decision (Keputusan Direktur Jenderal Pajak, KEP) 239/PJ/2026 must meet the conditions for the relief before 31 December 2026. Depending on the penalty type and when the obligation is met, relief of up to 100% is available, covering late-filing penalties, interest on underpaid tax in an amended return, and interest on late payment or withholding; the original report did not list the percentage for each tier and this brief does not supply one. Relief must be formally applied for and is not automatic, and the principal tax remains payable; this is not a tax amnesty. Source
  4. Indonesia|Labour protection law passed by parliament, publication details to be confirmed: Indonesia's House of Representatives (Dewan Perwakilan Rakyat, DPR) passed the Labour Protection Law (UU Pelindungan Ketenagakerjaan) in plenary on 6 October 2026. As of 23 October, presidential assent, the law number and the promulgation and effective dates remain to be confirmed. Yassierli, Indonesia's Minister of Manpower (Kementerian Ketenagakerjaan), said on 18 September 2026 (outside this brief's period, given as background) that the 2027 provincial minimum wage (UMP) formula had not yet been discussed within the ministry and would depend on the final text of the Labour Protection Law, with no decision on whether the previous year's formula would be reused and no timetable announced. Source 1, Source 2
  5. Malaysia|September exports up 54.5% year on year: according to The Star on 19 October 2026, Malaysia's Ministry of Investment, Trade and Industry (MITI) reported September exports of RM215.11 billion, up 54.5% year on year. Exports to the United States reached RM38.03 billion, up 89.9%, driven mainly by demand for electrical and electronics (E&E) products; that is a destination and product breakdown and not the same basis as total exports. Source
  6. Malaysia|Lower SME income tax rates in the 2027 budget remain a proposal: Malaysia's Minister of Entrepreneur Development and Cooperatives reiterated on 21 October 2026 that SME income tax rates would each fall by one percentage point under the 2027 budget (chargeable income up to RM150,000 from 15% to 14%; RM150,000 to RM600,000 from 17% to 16%). Under the Dewan Rakyat order paper, the policy-stage debate ran from 12 to 22 October and the ministerial winding-up begins on 26 October; as at 23 October the budget remains a proposal pending legislation, not yet enacted. Source
  7. ASEAN|Digital Economy Framework Agreement (DEFA): according to ASEAN Briefing on 19 October 2026, DEFA negotiations concluded in May 2026 and signature is expected in November 2026; it had not been signed as of 23 October and no entry-into-force date has been set. Source
  8. International|EU CBAM extension to downstream products: according to EUROMETAL on 20 October 2026, industry bodies including Eurofer and EUROMETAL called for the broadest possible extension, and the first trilogue had been scheduled for 20 October, with a second provisionally set for 30 November 2026 and the co-legislators aiming for agreement before the end of 2026. As of 23 October this brief's searches found no official public record confirming the outcome of the 20 October meeting. For manufacturers exporting metals and metal products to the EU, demand for emissions reporting and supply chain traceability continues to rise. Source


What this brief is tracking

  1. The full transitional provisions of Vietnam's Decree 393/2026/ND-CP, and whether work permits issued before 5 December remain valid
  2. The vote on Vietnam's combined bill amending five laws, and when the 24 November paid holiday is written into the Labour Code
  3. The Royal Gazette publication date for Thailand's duty exemption on replacement equipment for flood-hit factories
  4. The outcome of the review of Thailand's Factory Act amendment and the content of heavier penalties
  5. The text of Indonesia's PP 40/2026, and the actual repeal date of BPJPH Regulation No. 4 of 2026
  6. The published text, law number and effective date of Indonesia's Labour Protection Law


To assess what these changes mean for your own operations, please Request a Consultation and the Digiwin Southeast Asia expert team will follow up.


This brief is compiled from public information for reference only and does not constitute legal, tax, labour or investment advice. Actual application should follow the latest announcements of each country's competent authorities.

鼎新數智購

6 Followers

鼎新數智在東南亞深耕近二十年,於越南、馬來西亞、泰國為新南向的服務軸心,向外包含印尼、菲律賓、柬…等國提供服務,具備豐富的跨國營運管理知識與在地服務團隊,為製造企業全球化提供數智化解決方案。
知識主題
管理與擴張方案

We use our own and third-party cookies for analytics and to show you ads based on your browsing habits and profile. For more information, see our Privacy PolicyPrivacy Policy.