26
The case for a Vietnam MES system has mostly been efficiency and quality. From 2027 there is a regulatory one too. Decree 372/2026/NĐ-CP, issued 29 September 2026 and effective 1 January 2027, sets up a national platform that traces products by unit or batch using GS1-compatible UIDs. It is mandatory for high-risk goods and voluntary in principle for exports; ministry lists and roadmaps are still pending. This article covers the rules, the open points, and an MES checklist. #VietnamMES #ProductTraceability #BatchTraceability #GS1 #VietnamManufacturing #SupplyChainManagement
A customer auditor picks a carton of shipped goods and asks the floor to answer within thirty minutes: which raw material batches went into it, which line and shift made it, and which other shipments used the same raw material batch. Factories that can answer usually do not rely on someone's memory. They rely on batch numbers recorded at receiving, material issue, production and shipping, and on those numbers matching one another.
This used to be a customer requirement. Vietnam's regulations are now moving the same way. On 29 September 2026 the Government issued Decree (Nghị định) No. 372/2026/NĐ-CP on the identification (định danh), authentication (xác thực) and traceability (truy xuất nguồn gốc) of products and goods, effective 1 January 2027 (basis: Decree No. 372/2026/NĐ-CP; subject to the latest official guidance) [1][2].
The decree does not require every factory to connect to the national platform on New Year's Day. It does set out what traceability data should look like. For factories already in volume production, with large lots and many part numbers, now is a good time to check shop-floor records.
The decree establishes the National Platform for Identification, Authentication and Traceability of Products and Goods, together with a national product database. Each product or batch on the platform has a product identifier (UID). As defined in the decree, a UID is a digital link that conforms to Vietnamese national standards and is compatible with GS1 international standards. It is generated automatically by the platform and can identify a single unit, a batch or a product type [1].
A UID does not replace the Global Trade Item Number (GTIN), the Global Location Number (GLN) or existing traceability codes that enterprises already use [1]. In other words, a factory's barcode and batch numbering scheme does not have to be discarded. The task is to make it map to UIDs.
Under the decree, traceability is recorded by creating digital certificates (chứng chỉ số) through the UID when key events occur across production, import, export, circulation and consumption. The Government's online newspaper names two points in time: invoice issuance, and the moment customs decides on clearance [1]. According to the decree text carried by a legal database, each event record contains at least the UID, event type, time, location, stage and status, and the responsible parties [2].
Enterprises must ensure a digital certificate is created through the UID for each key event, unless end-of-stage confirmation data has already been synchronised to the national database. Where a service provider creates the certificates, the parties must agree on the scope of work and on responsibility for data accuracy [1].
High-risk goods: identification, authentication of master data and traceability are mandatory. Product lists, implementation roadmaps, whether tracing is by batch or by unit, and which events count as key events are set by the line ministries [1][2].
Medium- and low-risk goods: voluntary, and encouraged by the State [1].
Export goods: voluntary in principle, unless specialised law provides otherwise. The State encourages enterprises to adopt traceability to meet the requirements of importing countries and markets [1].
Out of scope: goods temporarily imported for re-export, in transit, moved under entrepôt trade (chuyển khẩu) or transshipped (trung chuyển), and goods imported and held in a bonded warehouse (kho ngoại quan) for export to a third country. Goods in the defence, security and cipher fields that require confidentiality of origin are also not subject to the mandatory rules [1][2].
The substance and requirements of traceability continue to follow Decree No. 37/2026/NĐ-CP, issued 23 January 2026, and relevant specialised laws [1][3]. Article 22 of Decree 37 already makes traceability mandatory for high-risk goods and has the line ministries publish the list of high-risk goods and the roadmap for mandatory traceability. Clause 5, Article 23 lists the minimum traceability data, including product name, images, name and address of the producer or trader, origin, key tracking events, brand and trademark, lot or serial number (if any), expiry date (if any) and applicable standards [3]. Decree 372 requires traceability data to contain at least these items [1].
On reading "mandatory for high-risk goods", the first question is usually: does my product count? At present that question cannot be answered for any individual factory.
The list of high-risk goods is published by each line ministry based on risk assessment and may be updated as new products appear or as domestic or international risk warnings are issued [4]. Thanh Niên reported on 2 October 2026, citing an official of the Ministry of Industry and Trade, that LPG cylinders (bình gas) are among the items on the high-risk list [4]. Beyond that, this article has not obtained a complete list and cannot infer whether common manufactured items such as electronics, machinery, plastics or textiles are included.
1 January 2027 is the decree's effective date. Under the decree, the lists of high-risk goods and the roadmaps for applying the rules are decided by the line ministries, and the actual starting point for individual items is still to be announced [1][2] (subject to the latest official guidance).
A practical position is therefore: do not presume you are regulated, and do not wait for the lists before acting. Get shop-floor records right first, so that they can connect once the lists are published.
Translated into factory terms, the decree asks for two kinds of data.
The first is master data, which changes little: product name, enterprise information and tax code, origin, brand and applicable standards, among others. Under the decree's definition, the lot or serial number (if any) is also listed as master data [2]. Most of this already sits in the item and vendor master files of the ERP. What needs checking is whether it is written consistently across systems.
The second is event data, generated with every batch: when, where, on which batch, what was done, and who was responsible. This is the core job of a manufacturing execution system (MES). For a volume manufacturer, whether event data forms a chain depends on whether batch numbers at four nodes match one another.
The link between the supplier's batch number, the import declaration and the in-house receiving lot. A common break is merging several supplier batches into one in-house lot at receiving, after which they cannot be separated again.
Which material lots a production order consumed and which production lot it produced. Breaks mostly occur at line-side stores and with shared materials: material is issued to the line and used across several orders, while the system records it only against the first one.
How production lots are packed, palletised and shipped, and which production lots a shipping lot contains. If rework and lot merging are recorded only on paper, the chain breaks here.
Which invoice and which export declaration a shipping lot corresponds to. The Government's online newspaper names invoice issuance and customs clearance as points in time, which means shop-floor batch numbers must ultimately tie to finance and customs documents. This segment usually spans both MES and ERP.
If any one of the four nodes is broken, the cost of reconstructing the data later rises quickly, because the physical goods have already moved on.
The five items below do not depend on the lists being published and can be self-checked now.
First, whether batch numbering rules are consistent across the plant. Are the coding rules for receiving lots, production lots and shipping lots documented, and do night shifts, subcontractors and new lines follow the same rules?
Second, whether batch numbers are scanned or copied by hand. Of the four actions of material issue, station move, warehouse receipt and shipping, how many still rely on handwriting or after-the-fact entry? The higher the share of manual copying, the more likely batch numbers will fail to match.
Third, whether rework, lot splitting and lot merging are recorded in the system. These three situations most easily break a batch's history and are what customer auditors ask about most.
Fourth, whether every event has a time, a location and responsible parties, meaning who records it and who receives it. The decree's minimum event data includes these items. If station records hold only quantities, without station and time, fields need to be added.
Fifth, whether MES batch numbers can be tied to ERP delivery notes, invoices and customs declarations. If the two systems are compared through manual exports, first confirm which field serves as the shared key.
The supplier side needs attention too. If incoming materials carry no batch number, or each supplier labels batches differently, Node 1 cannot connect. Writing incoming batch numbers and label formats into delivery requirements under supplier relationship management (SRM) is a lower-cost place to start, and the first segment to align within a supply chain management system.
A customer audit asks whether the history of a batch can be explained. The regulation asks whether key events have left verifiable records. The formats differ, but both rest on the same data chain: consistent batch numbers, complete events and matching documents.
One further provision is worth noting: authentication (xác thực) results on the platform do not replace conformity assessment, state quality inspection and similar activities, or decisions of the competent authorities [2]. Traceability keeps the record clear. Quality and compliance themselves still have to be achieved separately.
The benefit of starting now is that there is no need to build a separate set of records for the regulation. Once shop-floor batch and event records are in order, they serve customer audits first. When the ministries publish their lists and roadmaps, the same chain can then be mapped to UIDs.
If you would like to review batch records from receiving to shipping at your factory in Vietnam, or assess how data should connect between MES and ERP, you are welcome to fill in the request form. Consultants familiar with the shop floor can help with the review.
The regulations and figures cited in this article are subject to the latest announcements of the competent Vietnamese authorities.
A1: It cannot be answered across the board at this stage. The list of high-risk goods and the roadmap for mandatory traceability are published, and may be updated, by the line ministries, and this article has not obtained a complete list. 1 January 2027 is the effective date of Decree No. 372/2026/NĐ-CP. The actual starting point for individual items follows the lists and roadmaps published by each ministry and is subject to the latest official guidance.
A2: Under the decree, traceability for export goods is voluntary in principle, unless specialised law provides otherwise, and the State encourages enterprises to adopt it. Goods temporarily imported for re-export, in transit, moved under entrepôt trade or transshipped, and goods imported and held in a bonded warehouse for export to a third country, are outside its scope.
A3: No. Under the decree, a UID does not replace GTIN, GLN or existing traceability codes. It is a digital link compatible with GS1 standards. In practice the task is to make existing batch numbers map to UIDs, which requires batch numbers at the four nodes of receiving, production, shipping and documents to match one another in the system.
[3] ExtendMax, Nghị Định số 37/2026/NĐ-CP về thi hành Luật Chất lượng Sản phẩm Hàng hóa, 13 April 2026
[4] Thanh Niên, Định danh, truy xuất nguồn gốc hàng hóa rủi ro cao như thế nào?, 2 October 2026
鼎新數智購
6 Followers
延伸閱讀
鼎新數智購
6 Followers