ERP in a Thai Medical Device Plant: From 15-Day Reports to Same-Month Close

For medical device makers, a Thailand ERP implementation is never only an efficiency question. It is an audit question. A Chinese-owned manufacturer that began in plastic packaging in Thailand in 1990 spun out a medical device entity in 2020, then met a pandemic demand spike and collapse while costing still ran on spreadsheets, leaving management 15 to 20 days behind the numbers. See how staged ERP and WMS rollouts brought the monthly close back inside the month and built two-way traceability for ISO 13485. #ThailandManufacturing #ERPImplementation #MedicalDevices #ISO13485 #Traceability #WMS

1. Company profile: from plastic packaging into medical devices

Winbest Industrial (Thailand) set up its plant in Thailand in 1990, starting with plastic film and packaging, and over three decades extended its range into beauty products, hospital equipment and medical measurement devices [1].


In 2020 the group made a decision that is less common in manufacturing: it carved the medical business out into a separate legal entity, Winbest Biotech (Thailand), dedicated to medical devices and protective products.


Behind that decision was a market judgement. Regulatory requirements, quality management standards and customer audit intensity for medical devices sit in a different league from general plastic goods. Sharing one ledger and one set of processes slows both sides down: general products get dragged by medical documentation requirements, while medical products become harder to evidence when they share lines with non-medical output. Two entities means two management logics running separately, and it gives the medical business its own compliance depth.


Winbest Biotech spans four categories: medical furniture (patient beds, bedside cabinets, wheelchairs, nurse trolleys), medical devices (blood glucose meters, blood pressure monitors, ear thermometers, oxygen concentrators, pulse oximeters), protective apparel (masks, surgical caps, isolation gowns, surgical gowns, boot covers) and medical consumables, with more than 200 items [2].


2. The market test: a new entity founded in a boom-and-bust cycle

Winbest Biotech was founded in 2020, and the timing was itself a test.


Thailand's medical device industry went through a violent boom-and-bust cycle during the pandemic. Exports grew by an average of 30.8% a year across 2020 and 2021. By 2022, as the pandemic eased and protective demand fell away, total exports dropped to THB 120 billion, down 33.5% year on year. Single-use devices, which account for 85.3% of exports, fell 38.5%, while latex and surgical gloves plunged 72.1%, shrinking from 54.5% of export value in 2021 to 22.9% in 2022 [4].


For a medical device entity founded in 2020, the first two years were a rollercoaster. In that situation the pressure on management is not "are we busy" but "can we actually calculate this". When orders spike, how much material should be held and which items genuinely make money. When demand recedes, what is the remaining inventory worth and where is the obsolete stock sitting. Both questions point to the same thing: accurate numbers, available now.


And for medical devices there is a second thing that cannot be compromised either.


3. The management challenge: traceability is a test of evidence

For a manufacturer, building a line, buying equipment and hiring people are problems money can solve. Medical devices add a harder one: production traceability.


When a mask or a hospital bed is sold to a hospital, the buyer does not only want delivery. They want you to answer, at any time: which lot of non-woven fabric went into this batch? When did that lot arrive, who inspected it, what were the test results? If a quality concern surfaces three months later, how fast can you locate every unit from the same lot?


This is not an awkward customer. It is the baseline expectation of the ISO 13485 medical device quality management system and of medical device regulators in each market. Winbest Industrial holds ISO 9001, ISO 14001, ISO 13485 and Green Factory certification [1]. For Biotech, pursuing more hospital customers and export orders, traceability has to live inside daily operations rather than depend on a week of overtime before an audit.


Underneath traceability sits data. When raw material lots, work orders, goods receipt and shipment live in four departments' spreadsheets, traceability depends on memory and luck.


Three management pressure points. Medical device manufacturing takes three problems that general manufacturing also has, but tolerates far more readily, and pushes all three to the point where they cannot be compromised:


1. Lot numbers must travel the whole way. Raw materials, work in progress, finished goods and shipment recipients must reconcile in both directions, without breaking at any handover.


2. Many items, complex formulations. Each of more than 200 items has its own bill of materials, so cost attribution and consumption control must be granular to the single item.


3. Documents must be available at any time. Audits are not announced in advance, and whether the documentation holds up decides whether the order stays.


4. The rollout: get documents into the system first, then make the warehouse visible

The management picture at the time had two gaps. First, data was scattered: production scheduling and costing ran on spreadsheets and handwritten documents, each department holding its own, with work orders hard to read, documents going missing and tracing a single order meaning asking around across departments. Second, feedback was too slow: management waited 15 to 20 days to see the previous month's consolidated reports.


The second gap was the critical one. The numbers in decision-makers' hands were always half a month old, and by the time a report arrived the market had turned again.


The group started its ERP project in 2020. The Digiwin Thailand team first went on site to map the product structure and actual working processes, then configured the system around the work order and lot number requirements specific to medical device manufacturing. Go-live was January 2021, covering both legal entities in the group [3].


The sequence was deliberately split into two stages, and that is why the results later held up.


Stage one: get daily documents into the system. Purchasing, work orders, goods receipt, shipment and accounting vouchers all moved to system-generated documents. This stage looks the least impressive and is the foundation for everything after it: without clean document data, cost cannot be calculated accurately and traceability cannot be established.


Stage two: make the warehouse visible. Once ERP was running stably, the group added a Digiwin WMS warehouse management system integrated with ERP [3].


The reason for phasing is practical. The value of WMS rests on ERP already holding correct item numbers, lot numbers and inventory balances. Implementing WMS before that base is clean leaves the shop floor facing two new processes at once, and neither gets done well.


5. System and process: four daily workflows digitalised

ERP governs the ledger and the process flow. WMS governs where physical goods sit and how they move inside the warehouse. With the two connected, four daily workflows look like this [3]:


Inbound inspection. Raw materials are received by barcode scan, handling 40 to 50 items per pass, with quantities reconciled against the purchase receipt and status reported in real time.


Material issue. Scanning the raw material barcode issues the material, the system generates the issue note and deducts stock immediately, with no need to return to the office to post it.


Finished goods receipt. Finished goods are labelled with a printed barcode as they come off the line, scanned into the warehouse, and assigned a storage location automatically.


Shipment. Once sales raise the delivery order, the warehouse picks against it and confirms by scan to complete the shipment.


With the four connected, the line from raw material lot to finished goods shipment finally joins up, and traceability moves from something achievable in theory to something done every day.


6. The tool: one label holds the chain together

What makes that line run is a label.


Winbest Biotech's product labels carry item number, lot number, serial number and quantity, plus a scannable barcode, effectively giving every carton an identity document [3]. The label is printed and applied at finished goods receipt, and every subsequent move, pick and shipment is completed by scanning it.


That label solves two things at once: the warehouse knows where the goods are, and quality knows where they came from.


A second, easily underestimated factor is language. The system switches between Chinese, English and Thai. On a floor where Chinese-speaking managers and Thai-speaking staff work side by side, that removes a layer of translation and re-confirmation, which shows up in training hours and in post go-live error rates.


7. Results: from bookkeeping level to management level

The results can be read in three layers [3].


Bookkeeping level, information quality. More than 50 handwritten documents and goods receipt notes per day were eliminated, replaced by barcode scanning with status reported in real time. The numbers in the system match the floor, with no after-the-fact manual reconciliation.


Process level, operational efficiency. Management reports that used to take half a month are now available within 3 to 5 working days. Inventory turnover improved by roughly 20% to 30%, with lower stock-out risk and lower carrying cost. Flow can be queried in both directions, from raw material lot through to finished goods delivered to hospitals.


Management level, business outcomes. The monthly close moved from mid-following-month to the last day of the month itself. Decision-makers no longer look at numbers that are half a month old.


(The figures above are a reference range reported by the company; verify actual results against your own conditions.)


The same system lands differently on three groups: decision-makers get time back, with the reaction window moved almost two weeks earlier; middle managers get control back, with scheduling and material preparation no longer relying on experience alone; front-line users lose duplicated work, with scanning replacing hand-copying and the system blocking mismatched quantities.


8. Three notes for Chinese-owned manufacturers building in Thailand

First, push certification requirements back into data design. Many companies build the plant and start production first, then discover before an audit that the documentation cannot be reconstructed. Lot numbering rules and document flows belong in the system design from day one.


Second, do not expect it all at once. Phasing is not slowness. The later stage consumes the clean data the earlier stage produces.


Third, treat interface language as a rollout requirement. On a multilingual site, a single-language system shows up as training cost and error rate.


9. After the trial: turning resilience into lasting capability

Looking back, those two pandemic years were a trial for Thailand's medical device sector. Exports first climbed at roughly 30% a year, then contracted by a third in 2022 [4]. What got weeded out was often not the plant short on capacity, but the plant that could not see its own numbers.


Winbest Biotech came through. Having completed both the ERP and the WMS stages, an entity founded only in 2020 now holds three things it did not have before: a ledger that closes within the month, inventory whose location and lot are visible, and a traceability chain that runs all the way from raw material to the hospital.


With the underlying capability rebuilt, the road ahead opens up. The group has extended the same management logic to the parent company and is evaluating a MES manufacturing execution system to push management depth from accounting and warehousing into the production line. Once lot numbers and inventory are traceable, process parameters and inspection results are the next things to be recorded.


Further out sits sustainable operation. Winbest Industrial already holds ISO 14001 environmental management and Green Factory certification [1], and carbon accounting, energy management and supply chain disclosure all rest on the same foundation: you can only report what you can calculate. Building that data foundation over the past few years solved more than the immediate management problem.


From plastic packaging to medical devices three decades later, this Chinese-owned Thai manufacturer is still moving forward. In the words of Winbest Biotech management: "The system moved us from assessing after the fact to deciding on real-time data." That is precisely what allows the company's stated commitment, We work for better healthcare, to be delivered year after year.


Frequently Asked Questions


Q1: How does ERP implementation for medical devices in Thailand differ from general manufacturing?

A1: The difference is mainly lot numbering and traceability. ERP in general manufacturing centres on cost and delivery. Medical devices add a layer of regulatory evidence: raw material lots, process records, inspection results and shipment recipients must reconcile in both directions to satisfy ISO 13485 and medical device regulators in each market. Lot numbering rules, storage location management and label coding therefore need to be defined during the planning phase of a Thailand ERP implementation, not bolted on after go-live.


Q2: Do ERP and WMS have to be implemented at the same time?

A2: Not necessarily, and usually it is not advisable. ERP handles documents, cost and accounting logic; WMS handles where physical goods sit and how they move in the warehouse. The value of WMS rests on ERP already holding correct item numbers, lot numbers and inventory balances. Implementing WMS before that base is clean leaves the shop floor facing two new processes at once. This case took the phased route: ERP first, WMS second.


Q3: Our data is messy. Should we clean it up before going on a system?

A3: Data cleanup is part of the implementation, not a prerequisite for it. In practice, taking stock of and cleaning master data often absorbs a meaningful share of project time, including unifying item coding, physical inventory counts and closing out historical lot numbers. The practical approach is to schedule that work explicitly and assign dedicated people to it, rather than expecting it to resolve itself beforehand.


References

[1] Winbest Industrial (Thailand) Co., Ltd., company profile and certifications, retrieved October 2026

[2] Winbest Biotech (Thailand) Co., Ltd., product range and company history, retrieved October 2026

[3] Digiwin Southeast Asia project team, WINBEST on-site customer interview, September 2026

[4] Krungsri Research, Industry Outlook 2023-2025: Medical Devices, 12 September 2023

鼎新數智購

6 Followers

鼎新數智在東南亞深耕近二十年,於越南、馬來西亞、泰國為新南向的服務軸心,向外包含印尼、菲律賓、柬…等國提供服務,具備豐富的跨國營運管理知識與在地服務團隊,為製造企業全球化提供數智化解決方案。
知識主題
管理與擴張期講座
成長與量產期講座

We use our own and third-party cookies for analytics and to show you ads based on your browsing habits and profile. For more information, see our Privacy PolicyPrivacy Policy.